Nov 16, 2026

What materials are used to make electric ball screws?

Leave a message

In the realm of precision engineering, electric ball screws play a pivotal role in converting rotary motion into linear motion with high efficiency and accuracy. As a leading supplier of Electric Ball Screw, I am often asked about the materials used in their production. In this blog post, I will delve into the various materials that are commonly employed to manufacture electric ball screws, exploring their properties, advantages, and applications.

Steel Alloys

Steel alloys are the most widely used materials for electric ball screws due to their excellent mechanical properties, including high strength, hardness, and wear resistance. The most common steel alloys used in ball screw manufacturing are high - carbon chromium steels, such as AISI 52100.

AISI 52100 steel contains approximately 1% carbon and 1.5% chromium, which provides it with high hardness and good corrosion resistance. After heat treatment, it can achieve a Rockwell hardness of around 60 HRC, making it suitable for high - load applications. The high hardness also ensures a long service life, as it can withstand the high contact stresses generated during the operation of the ball screw.

Another popular steel alloy is stainless steel, such as AISI 304 and AISI 316. Stainless steel offers good corrosion resistance, which is essential in applications where the ball screw is exposed to moisture, chemicals, or harsh environments. However, stainless steel generally has lower hardness compared to high - carbon chromium steels, which may limit its use in high - load applications.

Ceramics

Ceramics are increasingly being used in the manufacturing of electric ball screws, especially in high - speed and high - precision applications. Silicon nitride (Si₃N₄) is one of the most commonly used ceramic materials for ball screws.

Ceramics have several advantages over steel alloys. First, they have a much lower density than steel, which reduces the inertia of the ball screw. This allows for faster acceleration and deceleration, making them ideal for high - speed applications. Second, ceramics have excellent wear resistance, which can significantly extend the service life of the ball screw. Third, ceramics have a low coefficient of thermal expansion, which means they are less affected by temperature changes. This property is crucial in applications where dimensional stability is required.

However, ceramics also have some limitations. They are more brittle than steel, which means they are more prone to cracking under high impact loads. In addition, the manufacturing process of ceramic ball screws is more complex and expensive compared to steel ball screws.

Plastic Materials

Plastic materials are used in some specific applications of electric ball screws, mainly for their low cost, light weight, and self - lubricating properties. Polyoxymethylene (POM), also known as acetal, is a common plastic material used in ball screw manufacturing.

POM has good mechanical properties, including high stiffness and low friction. It is self - lubricating, which means it can operate without the need for additional lubrication in some cases. This makes it suitable for applications where maintenance is difficult or where lubrication may cause contamination.

However, plastic materials have lower strength and wear resistance compared to steel and ceramic materials. They are also more sensitive to temperature and humidity changes, which may limit their use in some harsh environments.

Hybrid Materials

Hybrid ball screws combine the advantages of different materials. For example, a hybrid ball screw may use a steel screw shaft and ceramic balls. This combination allows for high load - carrying capacity and excellent wear resistance, while also reducing the inertia of the system.

Hybrid ball screws are often used in applications that require a balance between high performance and cost - effectiveness. They can provide better performance than traditional steel ball screws in high - speed and high - precision applications, while being more affordable than fully ceramic ball screws.

Bidirectional Ball ScrewLinear Lead Screw suppliers

Applications of Different Materials

The choice of material for an electric ball screw depends on the specific application requirements. For high - load and high - precision applications, such as machine tools and aerospace equipment, steel alloys or hybrid materials are often the preferred choice. The high strength and wear resistance of steel alloys can ensure reliable operation under heavy loads, while the combination of different materials in hybrid ball screws can provide optimal performance.

In high - speed applications, such as robotics and semiconductor manufacturing equipment, ceramics or hybrid ball screws are more suitable. The low inertia and excellent wear resistance of ceramics can enable high - speed operation with minimal wear.

For applications where cost is a major concern or where self - lubrication is required, plastic materials may be used. Examples include some consumer products and light - duty industrial equipment.

Why Choose Our Electric Ball Screws

As a professional supplier of Electric Ball Screw, we offer a wide range of ball screws made from different materials to meet the diverse needs of our customers. Our products are manufactured using advanced technology and strict quality control processes to ensure high performance and reliability.

We also provide customized solutions for our customers. Whether you need a Bidirectional Ball Screw for a special application or a Linear Lead Screw with specific requirements, our experienced engineering team can work with you to develop the most suitable solution.

If you are interested in our electric ball screws or have any questions about the materials and applications, please feel free to contact us for procurement and further discussion. We are committed to providing you with the best products and services.

References

  • ASM Handbook Committee. ASM Handbook, Volume 1: Properties and Selection: Irons, Steels, and High - Performance Alloys. ASM International, 1990.
  • Schaeffler Technologies AG & Co. KG. Rolling Bearing Technology. Schaeffler, 2010.
  • Jones, A. R. Ceramic Materials for Engineering Applications. Springer, 2002.
Send Inquiry